SY046 Digitally Tareable Load Cell Amplifier with Indicator
The SY046 Digitally Tareable Load Cell Amplifier is an analogue amplifier with the digital gain advantages. This amplifier can excite up to 4 x 350Ω bridge transducers and provides either a 4 – 20mA, 0 – 5V or 0 – 10V output with a remotely triggered zero offset. This feature is of great value when load cells are difficult to access or other strain gauged components have been installed in difficult environments. The display is very useful during set up and calibration.
The SY046 is supplied with a user configurable digital gain (gains of 1, 2, 4 or 8). This can be very useful if a small load is to be monitored with a high dead load offset e.g connected to a 1 tonne cell with a digital gain of 8 the input could accept the full 0 – 1 tonne range while the output covers a range of 125kg anywhere within the input span.
The zero can be reset by means of a positive pulse or by a remote switch to the V+ or GND. A wide range of mV/V sensitivities is accepted (please specify) and there is a +/-20% adjustment at the calibration stage of the set up.
A 5 way switch selects the display to show the output or a % of the full scale, if its either uni-polar or bipolar, the input sampling rate and what gain setting you require.
The Digitally Tareable Load Cell Amplifier is supplied in an ABS din rail mounted case with a 8mm 3 digit display.
Choose a load cell to go with it.
Changes in specification may occur.
If you don’t see the exact product version you are looking for call us. It might be one of our specials. We have many variants some are done exclusively for one client so if you are trying to replace a part we can guide you to the correct place.
We are always happy to discuss particular applications or special requirements so don’t hesitate to contact us.
Designed and manufactured in our UK factory by Synectic Design Ltd