SD035-ICA Miniature In-Cell Load Cell Amplifier
SD035-ICA is a Miniature Incell Load Cell Amplifier. Designed to fit inside majority of load cells, pressure and torque transducers. The SD035 in cell load cell amplifier excites provides excitation voltage and signal conditioning.
Incell Load Cell Amplifier Key Features
- 2 Wire loop powered or 3 wire versions
- 2 Wire can operate with 350Ω load cell
- Non-interactive zero span pots (12 turn trimmers) making calibration easier and faster
- High noise immunity
- Compact miniture design 37mm x 12.5mm x 9mm
- User-selectable gain resistor is a through-hole version making it simple to change if required
- Supplied with preconfigured sensitivity if required
We offer customers the choice of a 2-wire Amplifier that will operate with a bridge resistance of 1KΩ and above. Padding resistors can be supplied for a lower bridge resistance which also allows the unit to operate with a bridge resistance as low as 350Ω.
You can also choose a 3-wire Amplifier, that will operate with a bridge resistance between 350Ω – 5KΩ without the need for padding resistors. Sensitivity can also be changed by simply replacing 1 gain resistor.
Because the amplifiers are very small you need to solder the sensor (load cell or strain gauge) to very small pads on the circuit board. This does require some fine skills. If you have any concerns call us.
We manufacture circular in cell amplifiers as well if they suit the space better email us using the link or call 01204 819021
All Photos are for your guidance only. We reserve the right to modify the products as shipped as an when required due to component availability and in line with our policy of continuous improvement.
Changes in specification may occur.
Click here to view Synectic’s Load Cell selection.
We are always happy to discuss particular applications or special requirements so don’t hesitate to contact us.
Designed and manufactured in our UK factory by Synectic Design Ltd