SY091 Digital Strain Gauge Indicator

From: £599.00 (+VAT)

SKU: SY091/1

You may also like…

Description

SY091 Digital Strain Gauge Indicator

SY091 is a Rugged 24 bit portable strain gauge indicator, which can indicate the load present on one or two attached cells.  Display measurements from plug in sensors.  The sensors can be load cells LVDTs or pressure sensors.  2.4Ghz wireless connectivity is also an option.  The unit has a 10.75mm 8 character (+/- 5 digit measurement) LCD display.

Portable Strain Gauge Indicator Key Features

  • +/- 5 digit measurement
  • 1 or 2 sensor inputs  (Dual Channel version gives interactive measurement)
  • Wireless sensor connection 2.4GHz Radio link optional extra
  • 7 point Linearisation
  • RS232 or USB communication option for logged data
  • Easy calibration
  • Reserve batteries
  • Pelican Protector Case

2 Channel version

Two individually calibrated transducers can be set to trigger and capture a reading when the other channel reaches a specified target.  This product has many features that can be enabled to meet a wide range of needs.  Ideal for off shore applications.

Calibration

Calibration can be achieved by adding a known load or simply entering the mV/V value from the load cells calibration certification.  Calibration details of up to 16 load cells can be stored. Each setup can be configured to have correction applied for non-linear transducers.  Many transducers produce a linear output but some produce a non linear output and would benefit from compensation to produce a more accurate reading.  The SY091 indicator achieves this by allowing deviation from a straight line ideal.  Deviation values can be entered to cover both tension and compression. Once the zero and full scale output points of the sensor have been defined, the 7 point linearisation values can be entered to correct the measurements.

Portable Strain Gauge Indicator Key Features

  • +/- 5 digit measurement
  • 1 or 2 sensor inputs  (Dual Channel version gives interactive measurement)
  • Wireless sensor connection 2.4GHz Radio link optional extra
  • 7 point Linearisation
  • RS232 or USB communication option for logged data
  • Easy calibration
  • Reserve batteries
  • Pelican Protector Case

 

The unit can also be fitted with an RS232 interface via a standard 9 way D-type socket, or a USB interface via a panel mount mini USB connector to stream an ASCII representation of the displayed reading.  Powered by 2xAA batteries.

Typical current consumption when connected to a 350Ω load cell is 70mA, giving approximately 31 hours of continuous operation with standard alkaline batteries.

This instrument is fitted with a 4 compartment battery holder giving the option of having a reserve set of batteries that can be switched in using the toggle switch when the main batteries are getting low (indicated on the display).

2.4GHz Wireless connectivity is available as an optional extra.  The Aerial is fitted in the case and a module to link to the load cell is also available.

Click here to view Synectic’s Load Cell selection.

This is a product that we want to discuss with you.  Call and tell us about your particular applications or special requirements don’t hesitate to contact us.

Changes in specification may occur.

Designed and manufactured in our UK factory by Synectic Design Ltd

Standard Specification

Weight 2 kg
Dimensions 270 × 246 × 124 mm
Calibration method

Known load, mV/V value & Shunt resistor

Comms

RS232 or USB for transferring logged data to a PC

Data logging

optional extra

Setups stored

16

Teds compatible

Available on request

Power supply

3V (2x AA Batteries)

Display

+/- 5 Digit LCD

Linearisation

Yes (7 Point)

Product Data


SY091 Data Sheet Download Here
Note: There are 1 Manuals/Data Sheets which are only available to Registered Users.

Click Here to Login/Register