SY018 Strain Gauge Amplifier- Din rail mounting

From: From: £0.00 (+VAT)

Clear
SKU: SY018V-I-1

You may also like…

Description

SY018 Strain Gauge Amplifier- Din rail mounting

Our compact strain gauge amplifier can be used in applications requiring 4-20mA or a voltage signal from a strain gauge bridge transducer.

This strain gauge amplifier has a wide bandwidth (up to 30 KHz). It is capable of driving up to 4 x 350Ω load cells with a (17 – 30) V dc nominal input voltage.  The amplifier sensitivity range is 0.4mV/V to 100mV/V .

This product falls within the range that we call bespoke, therefore we do not carry finished products of this amplifier on the shelf.

The units wide bandwidth, coupled with the fact that it will give you a tightly defined range means that you can get the accuracy that you need to quite tightly defined parameters.  You can specify your range when you order this amplifier.  The range can be either unipolar or bi-polar.

The voltage output can also be specified 0-10V being the most common but 0-5V, +/-10V, +/-5V are also regularly requested options.

This DC powered unit is packaged in a very neat 72.5 x 18 x 62mm Din rail case.

Connections can be made by rising clamp terminals with 3.5 x 2.5mm apertures.

Strain Gauge Amplifier Special Features

  • High immunity to noise interference
  • Excellent stability voltage and current out
  • Reverse polarity protection
  • Designed to run on typical nominal voltage of 24V
  • Compact Din Rail enclosure

Our Mains powered version is housed in a wall mount IP65 sealed ABS Case measuring 162x83x55mm.

This product if requested can also be supplied PCB only.

For a wider input range with user configurable parameters See SY038, Versions also available for use with transducers other than load cells; potentiometers, pressure transducers, torque transducers etc.;  please specify your requirements below.

Changes in specification may occur.

Click here for details on Synectic’s load cells

We are always happy to discuss particular applications or special requirements so don’t hesitate to contact us.

Designed and manufactured in our UK factory by Synectic Design Ltd

Standard Specification

Features at a glance

DC Voltage in Current out

Power Supply

,

Enclosure

, , ,

Input

, , ,

Product Data


SY018 datasheet Download Here
Note: There are 1 Manuals/Data Sheets which are only available to Registered Users.

Click Here to Login/Register