SY-FM1 – Flow Meter
SY-FM1 flow meter transducers have been designed for use with mains and heating system water.
There are two types available-
One can operate with flow ranges between 0.25-6.5 L/min and the other can operate between 1.5-30 L/min.
The 0.25-6.5 L/min version gives approximately 4600 pulses/litre and the 1.5-30 L/min gives approximately 1200 pulses/litre.
Flow Meter Key Features
- Pulsed output proportional to flow rate
- Designed to fit 15mm diameter pipe connections
- Two versions available: 0.25-6.5 L/min and also 1.5-30 L/min
- Mains and heating system water applications
The output from the flow meter is a pulsed signal proportional to the flow rate. The output voltage ranges from 200mV (low) and VE+ (high: 5-30Vdc). This flow meter is manufactured in acetyl copolymer also with brass compression fittings at both ends to fit 15mm diameter pipe connections.
We are always happy to discuss particular applications or special requirements so don’t hesitate to contact us.
Designed and manufactured in our UK factory by Synectic Design Ltd